Cloud VTX 4120 Manual do Utilizador descarregar pdf (Página 11)

VTX-WM1 Installation Guide v1.0 11

Model type is conrmed, and any Network

faults. If an amplier cannot be found on the

network, a red cross appears in the Network

column, as shown below:

A green indicator in the Channels columns

conrms that each channel of each amplier is

operating normally.

Amplier Status

Each amplier’s performance and settings may

be checked in greater detail by clicking on its

name in the Unit Name column. This gives a

display as below:

Each channel of the amplier reports its status

as follows:

Monitors:

• Internal heatsink temperature

• Fan speed

• Clip limiter circuitry status

• Input signal level (in dBu)

Conguration:

• High-pass lter – rear panel switch setting

• Bridge mode – rear panel switch setting

• Input linking – rear panel switch setting

• Current level control – rear panel rotary

control setting

• Current external level control – RL-1

remote control plate setting (if tted)

Colours are used to indicate amplier

conditions:

• Green: Normal operation

• Yellow: Becoming marginal

• Red: Outside acceptable limits

In the Cong area, a green tick indicates that

a function activated by one of the rear panel

switches is ON, a red cross indicates that it is

OFF. The settings of the local and remote level

controls are shown as horizontal bargraphs,

with the “segments” changing from grey to

green as the level controls are advanced.

This page can be closed by clicking on any other

tab, or your browser’s “Back” button.

Network status

Clicking the CloudNET tab opens the

Network Overview page:

The CloudNET page lists all ampliers on the

system, together with conrmation of each

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários